Custom Print Fabric + Wallpaper + Textiles

Artwork Specifications

Preparing your Design

Your order can be delayed if you do not prepare your artwork correctly

 

Download our FREE artwork guide to perfectly set out your Pattern.

 

Then : Upload your Artwork

 

 

Please amend your artwork as follows prior to upload for printing. We accept TIFF, AI, EPS, PDF, JPEG format

  • Resolution : 180 DPI
  • Width x height : FULL SCALE – i.e the size you require the print to be - too your chosen guide.
  • Colour mode : RGB
  • Upload your file to our dropbox - https://surfacepatternprint.wetransfer.com/
  • Once your files are uploaded into the dropbox then please continue on this website to order your fabric.
  • You will need to state in the order name that the file is in our dropbox

In Photoshop to alter RESOLUTION & WIDTH x HEIGHT  go to:

IMAGE > IMAGE SIZE

In Photoshop you can alter Colour Mode by going to :

IMAGE > MODE > RGB

        Upload your Artwork NOW 

IMPORTANT :

Delete any layers that are not your design/artwork - i.e our guides/information

Flatten all layers – Essential to ensure parts of the prints are not missed

IMAGE > FLATTEN LAYERS

**Files that are not flattened may incur an additional artwork charge to correct**

 

Saving the File

Please save the file in the below formats:

  • File save format : TIFF format preferably
  • AI, EPS, PDF, JPEG also accepted
    Please name each file using the following layout in CAPS:
    FILE NAME _WIDTH X HEIGHT OF FILE (IN MM) _ QUANTITY_YOUR NAME Ie – RAINBOW DRESS _1360W X 2245H MM_ 1_ YOUR NAME

Sending the File

Select choose your file and upload at time of purchase.

Ensure to check all files are saved properly and can be opened prior to uploading

 

HELP YOURSELF! TIPS TO REDUCE ARTWORKING AND FABRIC COSTS

 

1.Laying up multiple / small artworks

If you have more than 1 design that will fit in the width of the fabric, you can lay them up on the same canvas to utilise the full width of the fabric.

Please make sure to FLATTEN the file once laid up.

 

2.Ensure your print repeats

If you have a repeat design, avoid disappointment and additional reprints or artwork charges by checking your design repeats.

To check if an artwork repeats in Photoshop GO TO:

FILTER > OTHER > OFFSET

Move the curser on the ‘Vertical ‘ slider until you can see where the top and bottom of the pattern meet.

MAKE SURE that the design runs seamlessly into itself.

Repeat the test on the ‘Horizontal’ slider to check the design match side to side.

 

3.Repeat your design to the full width

If your design is a tile, you can repeat your design easily to the full width of the fabric using the below steps

  1. SELECT > ALL
  2. EDIT > DEFINE PATTERN ( SAVE AS NAME )

Increase Canvas Width to correct fabric or print width – ie. 1400 mm

     3. IMAGE > CANVAS SIZE

Fill the Tile to the full width of the fabric and move to position

      4. LAYER > NEW FILL LAYER > PATTERN

Select the pattern you defined and the scale you want it to print at.

Position the repeated design correctly on the width of the fabric chosen then flatten the layer

*We will automatically position your print centrally on your fabric unless otherwise specified

     5. LAYER > FLATTEN IMAGE

Check the vertical repeat matches before sending to print using above steps.

 

Using the Surface Pattern Print studio

Surface Pattern Print have there own design studio that can create pattern repeats and designs for you

Studio time is charged at £40.00 / hour ex vat and any studio work is quoted before work has taken place.

Please contact info@surfacepatternprint.com for further details

 

*Please be aware we do not make any changes to image files received

This is the designers responsibility

*Your artwork must be sent print ready if not your order will be returned and delayed. 

 

                                                                                 Upload your Artwork NOW 

Search our store